Slab leaks tend to start where a line has corroded, rubbed against gravel or shifted with the soil, and the water can run for months unseen. Fast action limits damage to flooring and the foundation. Call the number on this page to be connected with a local plumber in Clearwater.

What each clue suggests
| What you notice | What it can mean |
|---|---|
| Warm spot on the floor | Hot water line leaking under the slab |
| Sound of running water at night | Pressurized line leaking in or below the concrete |
| Damp carpet or buckled planks | Moisture rising through the slab |
| Meter moving with every tap off | Water escaping from the supply line |
Hot lines fail first
Hot water lines under a slab tend to leak sooner because heat speeds corrosion and expands the pipe. A warm patch on the floor often means a hot line has pinholed. Cold lines leak too, but they rarely warm the floor. A plumber must confirm which line is involved before choosing the repair.
Much of the local housing dates to the 1970s, so buried copper, galvanized pipe and cast iron drains under the slab have had decades to corrode, and slab leaks are more likely.
Choosing a repair method
- Spot repair: open the slab over the leak and replace that piece of pipe
- Reroute: run new pipe overhead and cap the old line, often with less floor damage
- Replacement: repipe a larger part of the house if the lines are worn
- Lining or coating: possible on some lines, depending on condition
- Ask the plumber which fits your floor and pipe age
Comparing quotes fairly
- Check that each quote names the same repair method.
- Confirm whether detection is included or billed separately.
- Ask who restores the floor, and whether tile matching is included.
- Look at the warranty on both the pipe and the workmanship.
- Be wary of a quote that skips the trace and goes straight to demolition.
Clearwater water, sewer and gas
In Clearwater, drinking water and service lines fall under the City of Clearwater Public Utilities, and Clearwater Public Utilities handles the sewer side. Some addresses near the edges are served differently; check your bill.
Clearwater Public Utilities takes calls about mains, meters and street leaks at (727) 462-6633.
Clearwater Gas System, City of Clearwater is the gas utility for much of Clearwater. If you smell gas, leave first, then call 911 and Clearwater Gas at (727) 462-6633 from outside.
When a job needs a permit, the plumber pulls it from the City of Clearwater Planning & Development.
Plumbers who take calls here usually also cover Dunedin, Safety Harbor and Clearwater Beach.
Checklist for the day of the work
| Before | After |
|---|---|
| Clear furniture from the repair area | Walk the route and check the patch |
| Move pets and children from the dust | Read the meter with every tap off |
| Photograph the floor and walls | Photograph the finished work |
| Store water for drinking and washing | Ask for the invoice and warranty in writing |
Around Clearwater
Calls come in from across Clearwater, including around Clearwater Beach, Downtown Clearwater, Clearwater Memorial Causeway (State Road 60).
Slab Leak Repair questions in Clearwater
How do I know if I have a slab leak in Clearwater?
How do I check a plumber's credentials in Florida?
Should I shut off the water if I suspect a slab leak?
How long does a slab leak repair take in Clearwater?
More plumbing services in Clearwater
Slab Leak Repair nearby
Sources
Last updated: