If a private well stops delivering, the cause is often the pump, the pressure tank, the pressure switch or a power problem, and a plumber can tell which in one visit. Homes that connect to a public utility do not need this service. Call the number on this page to be connected with a local plumber in San Antonio.

What owners usually notice
- No water at any tap
- Pressure that fades during a shower
- A pump that clicks on and off every few seconds
- Air or spurts coming from faucets
- Sand, silt or a new odor in the water
- A higher electric bill than usual
A property showing two or three of these is worth a call before the pump burns out.
Sandy soil and well screens
Much of Tampa Bay sits on sandy soil, and a worn or damaged well screen lets fine sand into the pump and the household lines. Sand scours impellers and clogs aerators. If water suddenly looks gritty, the pump and the screen both need a look, and grit collecting in faucet aerators is often the first clue owners see. Fine sand left unchecked can ruin a good pump within a season.
Factors in the quote
- Pump type: submersible or jet
- Depth of the well and length of drop pipe
- Whether the pressure tank needs replacing
- Wiring, switch or control box repairs
- Water quality fixes added at the same time
- Ease of reaching the well head
Ask the plumber to itemize these so each charge is clear, and ask which items are optional upgrades.
Local details for San Antonio
the City of San Antonio Water Department supplies water to most San Antonio addresses; wastewater goes to San Antonio Water. Providers can differ by address, so your bill is the final word.
If the leak is at the meter or in the street, call San Antonio Water at 352-588-2127; a plumber handles the pipe on the house side.
Gas leaks are an outside-the-house call: leave, then phone 911 and Peoples Gas (877-832-6747).
When a job needs a permit, the plumber pulls it from the City of San Antonio, with permit services through the City of Dade City Building Department.
Nearby, the same kind of help is available in Wesley Chapel, Dade City and Zephyrhills.
Steps on site
| Stage | What happens |
|---|---|
| Diagnosis | Power, switch, tank and pump are tested |
| Repair | Faulty part is replaced or pump is pulled |
| Restart | System is primed and pressure is set |
| Check | Taps run clear at normal pressure |
Total time depends on well depth, and the plumber can give you a realistic window.
Don't ignore small changes
A pump that cycles a little faster or a faucet that coughs once in a while is the early warning. Catching it at that stage often means replacing a switch or recharging a tank rather than lifting a whole pump. For well users, a short service call now is usually easier than an emergency later.
Well Pump Repair questions in San Antonio
Is my San Antonio home on a private well?
Why does a well pump keep turning on and off?
Can a plumber fix a well pump the same day?
Should a well pump be replaced along with the tank?
More plumbing services in San Antonio
Well Pump Repair nearby
Helpful guides
Sources
Last updated: