To check for a leak, close every tap, then watch your water meter. If the dial still moves, water is escaping somewhere in the house or yard. A plumber can find where and explain the fix. Call the number on this page to be connected with a local plumber in Gibsonton.

When the bill is the first clue
Many homeowners find a leak only when the utility sends a bill that looks wrong. Compare it with the same month last year, remembering that irrigation and pool filling vary with the season. A large increase with no new habits is the signal to check the meter, and to call a plumber if the check shows flow.
Where leaks start
| Location | Why it leaks |
|---|---|
| Under the slab | Corrosion and abrasion on older lines that run through sand and gravel |
| Attic | Brittle plastic and loose fittings in the Florida heat |
| Yard | Roots, mowers and shifting soil near irrigation lines and the main, hard to see |
| Appliances | Worn hoses and valves that go unchecked for years |
The median home here was built in 2002, so most supply lines are CPVC or PEX. Leaks there usually come from fittings, fasteners through a line or high pressure.
Some properties use private wells or are not on public sewer. On a well, a leak makes the pump cycle often, which can be a clue; tell the plumber how your water arrives.
Local details for Gibsonton
Most Gibsonton households get their water from Hillsborough County Water Resources Department and send wastewater to Hillsborough County Water. Providers can differ by address, so your bill is the final word.
If the leak is at the meter or in the street, call Hillsborough County Water at (813) 307-1000; a plumber handles the pipe on the house side.
Gas leaks are an outside-the-house call: leave, then phone 911 and Peoples Gas (877-832-6747).
Hillsborough County Development Services issues the plumbing permits for Gibsonton addresses.
Nearby, the same kind of help is available in Riverview, Apollo Beach and Brandon.
How plumbers find leaks
A plumber starts by isolating the system and testing pressure, then listens with acoustic gear for escaping water and traces the pipe route. Thermal imaging and moisture meters can confirm a wet area. The goal is to pinpoint the spot, so the repair opens only a small section of wall or floor.
What affects leak detection cost
Leak detection is priced by the work involved: how many lines must be tested, how hard the home is to access, whether the leak is under a slab and how much equipment is used. The repair is usually priced separately. Ask what the detection fee covers and whether it applies toward the repair.
Preventing the next leak
Replace old washer hoses, check the water heater and know your water pressure. High pressure or a missing regulator stresses fittings in many houses and shortens the life of every joint. Read your meter every few months, since catching a small change early costs far less than finding wet drywall, warped floors or mold.
Leak Detection questions in Gibsonton
Who do I call about a leak on the street side of the meter in Gibsonton?
What does a leak detection visit involve?
How quickly should I fix a hidden leak?
Can a leak raise my bill even if the house looks dry?
More plumbing services in Gibsonton
Leak Detection nearby
Sources
Last updated: